RSGq-2

Part #: RSGq-2

RSGq-2

One hole filling capability
Two hole filling; vertical fill or tilted > 10 degrees
Includes FDR gas sensor and computer control
Gas sensor meter for visual display of filling process
Gas flow shuts off automatically when IG unit is full
Flow Rate = 15-80 Liters per minute (dependent on exhaust hole size)
Time to fill = (2 hole filling) 22 seconds; (1 hole filling) 27 seconds*
Complete with filling lances, snifflers, bottle regulator, and hoses
Designed and manufactured in North America, serviced worldwide

RSGq-2 Front Exterior View
Reference #	Description	FDR Part #
1	Legend - RSGq	11914
2	Maintained Pushbutton Actuator, Green	11244
3	RSGh - Red - Push Button Legend	11491
4	Hoyt Analog Meter, 0-4.9VDC, 60 on Center	11479
5	Momentary Pushbutton Actuator, Green	11245
6	Blue - Push Button Legend	11492
RSGq - 2 Back Exterior View
Reference #	Description	FDR Part #
7	10 Turn Locking Knob	11214
8	PLC 24vdc Input/Output, 2- 0...10 vdc Analog Output	11291
9	9 Pin Square Flange	11108
RSGq - 2 Front Interior View
Reference #	Description	FDR Part #
10	Proportional Pressure Controller (PPC)	11145
11	55 Single Valve, Pilot Operator	11133
12	Vacuum Switch	11151
13	8 Pin Octal Type Socket	11184
14	Remote Regulator, 1/2" npt Ports	11178
RSGq - 2 Interior Side View
Reference #	Description	FDR Part #
15	10K Pot	11217
16	35 Series (Single) Valve 24 vdc ILT	11208
17	Proportional Pressure Controller (PPC)	11145
RSGq - 2 Interior Side 2 View
Reference #	Description	FDR Part #
18	1.4" x 1/8" Male Connector	11007
19	Muffler	11099
20	Remote Regulator, 1/2" npt Ports	11178
21	1.4" x 1/8" Male Connector	11007
22	1/8" Tee Tapped 10-32	11050
23	35 Series (Single) Valve 24 vdc ILT	11208
24	Muffler	11099
25	Pressure Switch	11152
26	1.4" x 1/8" Male Connector	11007
27	1/4" x 1/4" Bulkhead Union	11011
28	1/8" Tee Tapped 10-32	11050
29	Tube SS Fitting, Sniffler (SBF-110)	10571
RSGq - 2 Interior Back View
Reference#	Description	FDR Part #
30	Fuse Holder	11127
31	Gas Sensor Thermal Switch, Adjustable	11132
32	Power Supply 1.2 amp 24vdc (1&2)	11155
33	Control Transformer, 120vac/16vac	11196
34	Sheet Metal - Base Plate	10246
35	1/2" x 1/8" Bulkhead Union	11058
36	1/4" x 1/4" Bulkhead Union	11011
37	RSG25 Back	10163
RSGq - 2 Bottom View
Reference #	Description	FDR Part #
38	1 hp Gas Pump	11596
39	Vac Rack Support Rod	10834
40	30" HG Steel Vacuum Gauge Model V500-30LM	11136
41	RSGz Vac Connector Plate	11433
42	1/2" x 3/8" Male Connector	11055
43	1/2 Stem Elbow	11064
44	19" Rack Mount Case 12-Space	11342
45	DN-2JM10 Jumper 12 Pole	11363
46	DN-M10 Mini Term Block PLC Direct Dinectors	11360
47	DN-ECM10 End Cover	11362
48	DN-EB15 End Bracket	11361
49	Solid State Relay 24 vdc / 120 vac 25 amp	11195

 

* The "Time To Fill" that is listed for the individual machines is based on the following sized unit:

Unit Size:

Spacer:
21/32" - 0.665" - 17mm
Height:
48" - 1220mm
Width:
24"- 610mm
Volume:
767 cubic inches - 0.44 cubic feet - 12.6 liters
Area:
8 square feet - 0.74 square meters

Note: There are a large number of variables when considering time to fill. The "Time To Fill" example is the result of filling an actual unit >90% using argon gas.