RSGe - Single Line Gas Filling Machine

Part #: RSGe

RSGe

Single line gas filler
One-hole filling capability
Two-hole filling; vertical fill or tilted > 10 degrees
Includes FDR gas sensor and computer control
Gas sensor meter for visual display of filling process
Gas flow shuts off automatically when IG unit is full
Flow Rate = 15-28 Liters per minute (dependent on exhaust size)
Time to fill = (2 hole filling) 71 seconds; (1 hole filling) 110 seconds *
Complete with filling lance, sniffler, bottle regulator, and hoses
Designed and manufactured in North America, serviced worldwide

RSGe - Front Exterior View
Reference #	Description	FDR Part #
1	RSGe Name Plate	11414
2	Legend plate - power	10453
3	Hoyt Analog Meter, 0-4.9VDC, 60 on Center	11479
4	RSGe-1 Face plate	11410
5	Horn 5-8-F piezo alarm	11100
6	Handles, 8"	11158
7	FDR Sniffler logo	10630
8	Black Plastic Fan Guard	11114
9	Mini Fan 115 vac	11115
10	Legend plate - FDR	10461
11	RSGh - Red - Push Button Legend	11491
12	Bulkhead Fitting - M12 x 1	11103
13	Bulkhead Fitting - M10 x 1	11104
RSGe - Front Interior View
Reference #	Description	FDR Part #
14	1/8" Male Elbow	11034
15	1/8" Female Tee	11013
16	1/4 x 1/8 Adaptor - Brass Pipe Fitting	11060
17	3/8" x 1/4" Male Connector	11009
18	Momentary Pushbutton Actuator, Green	11245
19	Gas Sensor Element, Orange Leads	10199
20	RSGe Name Plate	11414
21	3/8" x 3/8" Male Connector	11010
22	3/8 Run Tee with 7/16" Hole Drilled & Tapped 1/4 NPT	11062
23	8 Pin Octal Type Socket	11184
RSGe - Back Exterior View
Reference #	Description	FDR Part #
24	RSG25 Back	10163
25	Insulation Grommets	11332
26	Fuse Holder	11127
27	Mini Regulator, 1/4 npt Complete with Fittings	11167
28	3/8" x 3/8" Bulkhead Union	11012
29	1/4" x 1/4" Male Connector	11008
30	Cord Grip	11119
31	PLC 24 vdc Input/Output IP1612DC	11293
32	SPST On-Off Calibrate Switch Sensor O-Ride	11174
33	Din rail 1 1/4" for RSGz	11338
34	Argon Gas Sensor Board Assy, Rev 1.68.01A	10198
RSGe - Back Interior View
Reference #	Description	FDR Part #
35	Fuse Holder	11127
36	Power Supply 1.2 amp 24vdc (1&2)	11155
37	Solid state Relay 24 vdc/240 vac 10 amp	11194
38	1/10hp Vacuum Pump - Rotary Vane - 115v	11512
39	DN-M10 Mini Term Block PLC Direct Dinectors	11360
40	Muffler	11099
41	35 series (single) valve 24 vdc ILT	11208
42	Mini regulator, 1/4 npt complete with fittings	11167
43	Pressure switch	11152
44	30" HG Steel Vacuum Gauge Model V500-30LM	11136
45	Vacuum Relief	11138
46	Omron Temperature Controller	11474
47	Vacuum switch	11151

 

* The "Time To Fill" that is listed for the individual machines is based on the following sized unit:

Unit Size:

Spacer:
21/32" - 0.665" - 17mm
Height:
48" - 1220mm
Width:
24" - 610mm
Volume:
767 cubic inches - 0.44 cubic feet - 12.6 liters
Area:
8 square feet - 0.74 square meters

Note: There are a large number of variables when considering time to fill. The "Time To Fill" example is the result of filling an actual unit >90% using argon gas.